Sperry Marine Home Page

 






Navipilot 4000

Self-Tuning Adaptive Heading Control System

SUPPLEMENTARY EQUIPMENT


Universal Digital Repeater

Environmental
Temperature range -25°C to +70°C
Vibration 5 Hz to 50 Hz to IES 945/16.5
Protection grade front IP 65 to DN 40050
  rear IP 23 to DIN 40050
Power requirements 24 VDC (18 V to 36 V)
Power consumption 7 W
Type approved in accordance with the EC Council Directive 96/98/EC.



Dimensions and Weights
Console version Watertight Housing with Bracket Attachment
Front plate 96 mm x 96 mm to DIN standard
 Width 185 mm
Depth 125 mm Height 156.5 mm
Weight 650 g Depth 160 mm
Weight 1450 g

Status Input Opto-coupler, rating 24V/10 mA freeze mode, 180° heading change mode
Signal Output One RS 422 with protocols for the C. Plath Voyage Data Printer
Status Output Open collector, 50 V/ 500 mA. Status change according to speed input (threshold can be set in the setup menu)
Special Feature Course to Steer Indicator

NAVIGAT 2100

Fiber-Optic Gyrocompass


  • No moving parts
  • Solid-state technology
  • No maintenance during service life
  • High dynamic accuracy
  • Short settling time
  • Heading, roll, pitch and rate sensor
  • Meets all IMO recommendations including high-speed code
  • Data transmission by serial interface
  • IEC-61162 FAST and SUPERFAST output
  • Second gyrocompass and magnetic compass inputs
  • Compass monitor and heading selector function to DNV-W1
  • Automatic emergency power to GMDSS changeover
  • Basic system comprises only three units: Sensor Unit, Control and Display Unit and Interface and Power Supply Unit
  • Type approved, also to the High-Speed Craft Code, in accordance with the EC Council Directive 96/98/EC
  • The Rate-of-Turn output is type approved to the High-Speed Craft Code and in accordance with the EC Council Directive 96/98/EC and also fulfills IMO Resolution A.526(3)
    		•

    NAVIGAT X MK 1

    Digital Gyrocompass

    • Comprises one single unit
    • Microprocessor controlled
    • Easy to install and easy to service
    • Control and display unit in front cover with 4-digit heading display and 6 operating keys
    • High-speed follow-up system 100°/sec
    • Rate of turn output
    • Integrated TMC interface
    • Compass monitor function
    • Will drive a maximum of 12 analogue repeaters
    • Seven independent serial outputs RS 422 and IEC-61162 (replaces NMEA 0183)
    • Automatic north speed error correction
    • RS 422 SUPERFAST output
    • Second gyrocompass and magnetic compass inputs
    • Complies with IMO regulations A.424(XI), A.574(14), A.821(19) - High-Speed Code and ISO 8728
    • Type approved, also to the High-Speed Craft Code, in accordance with the EC Council Directive 96/98/EC

    Jupiter

    Magnetic Compass

    A class A compass with 180 mm card diameter for installation in NAVIPOL binnacles. Also available with a flux-gate and in an overhead mounting. Type approved in accordance with the EC Council Directive 96/98/EC.

    Analogue Magnetic Compass Repeater

    Magnetic compass heading console repeater with a 360° compass card
    Dimensions - 192 mm x 192 mm
    Weight - 1.5 kg
    Data transmission through RS 422 serial interface