System Components
- NaviPol Magnetic Compass Binnacles
- JUPITER Flat Glass Magnetic Compass
- Flux Gate
- Universal Digital Repeater
The NaviPol Magnetic Compass Binnacles
| Technical Data |
| Standard power supply |
230 VAC or 115 VAC or 24 VDC |
| Emergency power supply |
230 VAC or 115 VAC or 24 VDC |
| Weight |
60 kg |
| All binnacles are supplied with a Jupiter magnetic compass, a dimmer and B, C, D and Flinder's bar correctors. |
| Optional: Protective cover, set of additional B and C compensating magnets, replacement parts kit, azimuth device PV 24. |
| NaviPol I |
Standard & Steering Compass Reflector Binnacle |
|
The length of the reflector tube is determined by a + b. |
|
Reflector tubes are available in the following lengths: 1000, 1500 and 2000 mm |
| NaviPol II |
Standard & Steering Compass Binnacle |
| NaviPol III |
Steering Compass Binnacle with Window |
| NaviPol IV |
Standard & Steering Compass Reflector Binnacle with a Bypass Arrangement |
The JUPITER Flat Glass Magnetic Compass
| Bearing compass, steering compass, reflector compass and overhead compass for large vessels. A class A compass with a card diameter of 180 mm. It meets ISO 449 standards and is type approved in accordance with the EC Council Directive 96 / 98 / EC. Further type approvals for many other countries are available on request. The Jupiter compass may be installed in all NaviPol binnacles and its accuracy is better than 0.5°. |
|
Weight: 8.7 kg |
|
Options include: flux gate pickoff, shadow pin, wooden transport box, replacement parts kit, azimuth device
 |
 |
|
Jupiter Magnetic Compass |
Jupiter in Overhead Mounting Bracket | |
The Flux Gate with the Integrated Sine / Cosine Interface
The Sperry Marine flux gate is a new in-house development which combines modern electronic technology with SMD manufacturing techniques to produce a very compact unit which also incorporates a fully integrated sine / cosine interface.
| Technical Data |
| Power requirements |
12 V ±20% |
| Power rating |
40 mA |
| Output voltage |
±3.75 VDC (variable ±1.5 V to ±4 V) |
|
Two channels sine and cosine and a reference output |
| An adapter kit is available for attachment to non-Sperry Marine compasses. |
| Type approved in accordance with the EC Council Directive 96 / 98/ EC in combination with a Jupiter magnetic compass. |
|
 |
 |
| Integrated circuitry with sine / cosine |
Dimensions: |
| interface in SMD technology |
Body 70 mm |
|
Height 34 mm |
|
Mounting base 80 mm |
| An electronic compass with an automatic total compensation feature is also available from Sperry Marine. Heading output format is NMEA 0183 to 0.1° resolution. Accuracy 0.2° RMS. dimensions: body 124mm; height 102mm; mounting base 152 mm. |
Universal Digital Repeater
The Universal Digital Repeater in combination with NaviPilot V / M indicates the corrected magnetic compass heading through the RS422 magnetic compass heading output from the autopilot. The Universal Digital Repeater is available as a console version and in a watertight housing with bracket attachment. Type approved in accordance with the EC Council Directive 96 / 98/ EC.
| Environmental |
|
| Temperature range |
-25°C to +70°C |
|
| Vibration |
2 Hz to 100 Hz to IEC 60945 |
| Protection grade |
front IP 65 to DIN 40050 |
|
rear IP 23 to DIN 40050 |
| Power requirements |
18 to 36 VDC |
| Power consumption |
7 W |
| Signal input |
one RS422 input |
| Protocols |
|
| NMEA 0183 |
heading gyro, heading magnetic, roll, pitch, rate of turn, X-rate, Y-rate, water speed, ground speed, transverse water speed, transverse ground speed, total / daily miles, wind speed, wind angle, rudder angle, depth, air temperature, water temperature, time, revolutions per minute, heave |
| NaviPilot |
heading gyro, heading magnetic, rate of turn, roll, pitch |
| Lehmkuhl |
heading |
| NaviPilot |
heading gyro, heading magnetic, set heading, speed |
| Course to Steeer Indicator |
steer |
| Status Input |
opto-coupler, rating 24V / 10 mA freeze mode, 180° heading change mode |
| Signal Output |
one RS422 |
| Protocols VDR |
specified for the Sperry Marine Voyage Data Printer |
| Status output |
open collector, rating 50 V / 500 mA |
|
Status change according to speed input (threshold can be set in the setup menu) |
|
Dimensions and Weight |
| Console Version |
|
Watertight Housing with bracket attachment |
| Front plate |
96 x 96 mm |
|
Width |
158 mm |
|
to DIN standard |
|
Height |
155 mm |
| Depth |
140 mm |
|
Depth |
154 mm |
| Weight |
0.5 kg |
|
Weight |
1.0 kg |
 |
|
Universal Digital Repeater |
